Dr. Sean Owens greeting a tooth replacement patient at Kidder Owens Dental in Baton Rouge

Both bridges replace missing teeth with a fixed row of artificial teeth. A traditional bridge is anchored on crowns over the natural teeth beside the gap. An implant-supported bridge sits on dental implants, leaving neighboring teeth untouched and helping preserve the bone.

The choice matters most when you are missing more than one tooth, or when the teeth on either side of a gap are healthy and you would rather not have them shaped for crowns. Here is how the two compare and what usually tips the decision one way or the other.

What Is a Traditional Dental Bridge?

A traditional bridge is the most common type of bridge. It uses the teeth on each side of the gap as anchors. Those teeth are reshaped and covered with crowns, and the replacement tooth or teeth, called pontics, are joined between them as one fixed piece.

How It Is Placed

At Kidder Owens Dental, the dental bridge process starts with an evaluation using digital X-rays and 3D imaging. If the bridge is supported by natural teeth, those teeth are gently reshaped, a digital impression is taken, and the bridge is custom-made in ceramic or porcelain to match your other teeth. Once it is ready, it is bonded in place and the bite is adjusted.

Other Tooth-Supported Designs

  • Cantilever bridge, supported on one side when only one neighboring tooth is available
  • Maryland bridge, a conservative design that bonds a framework to the back of the neighboring teeth instead of crowning them

What Is an Implant-Supported Bridge?

An implant-supported bridge works the same way above the gums, but the anchors are dental implants rather than natural teeth. Titanium posts are placed in the jawbone, and once they have fused with the bone, a bridge is attached to them.

Why It Is Used for Several Missing Teeth

If you are missing three teeth in a row, you do not always need three implants. Two implants at either end can often carry a bridge that fills the whole space. The practice describes this option as a secure alternative to traditional bridges that does not rely on adjacent teeth for support.

How It Is Placed

Implant treatment starts with a comprehensive exam and 3D imaging to plan placement. The implants are placed in the bone, then left to integrate. The practice states this takes three to six months. Abutments are then attached, and the custom bridge is secured on top.

How Do the Two Bridges Compare?

This table covers the differences patients usually weigh.

Traditional bridge Implant-supported bridge
What holds it Crowns on natural teeth beside the gap Dental implants in the jawbone
Effect on neighboring teeth They are reshaped for crowns Left untouched
Effect on the jawbone Bone under the gap is not stimulated Implants help prevent bone loss
Surgery needed No Yes, implant placement
Typical timeline A few appointments, no healing period Several months, including implant healing
Lifespan 10 to 15 years or more with proper care Implants can last a lifetime; the bridge on top may need replacing over time
Best suited to Healthy-looking gaps next to teeth that need crowns anyway Gaps of several teeth, healthy neighboring teeth, adequate bone

The lifespan figures come from the practice’s own bridge and implant pages. How long either one lasts depends heavily on hygiene and regular checkups.

When Is a Traditional Bridge the Better Choice?

A tooth-supported bridge is a good option in several situations.

The Neighboring Teeth Already Need Crowns

If the teeth beside the gap have large fillings or are cracked, they may need crowns anyway. In that case, using them as bridge anchors protects them and replaces the missing tooth in one treatment.

You Prefer to Avoid Surgery

The practice notes that a traditional bridge does not require implants and suits patients who prefer a non-surgical option. It is also an option for people who are not candidates for implants because of bone loss or certain health conditions.

You Want a Shorter Timeline

Because there is no healing period for implants, a traditional bridge is usually finished in a few appointments rather than over several months.

When Is an Implant-Supported Bridge the Better Choice?

Your Neighboring Teeth Are Healthy

Shaping a healthy tooth for a crown removes enamel that cannot be replaced. If the teeth next to the gap are sound, an implant-supported bridge avoids altering them at all.

You Are Missing Several Teeth in a Row

A long span puts a lot of force on just two anchor teeth. Implants spread that load into the bone instead, which is why implant-supported bridges are often recommended for longer gaps.

You Want to Protect the Jawbone

When teeth are lost, the bone that held them starts to shrink. A traditional bridge sits on top of the gums and does nothing to stop that. Implants stimulate the bone as you chew, which helps maintain the jaw and your facial structure.

What If You Do Not Have Enough Bone for Implants?

Bone loss is common where teeth have been missing for a while. That does not always rule out an implant bridge. Bone grafting can rebuild the area first, though it adds healing time before the implants go in. Your 3D imaging will show whether grafting is needed.

Who Places the Implants?

At Kidder Owens Dental, implant surgery is led by Dr. Sean Owens, who focuses on surgical, implant and sedation dentistry and is a Fellow of the International Congress of Oral Implantologists. Sedation is available for patients who are nervous about surgery.

What About Replacing a Whole Arch?

If most or all of the teeth in one jaw are missing, a bridge is usually not the right tool. Options like All-on-4 implants or implant-supported dentures are designed for full-arch replacement. If you are only missing one tooth, our post on the single tooth implant process explains that route.

Caring for Either Type of Bridge

Neither bridge can get a cavity itself, but the teeth and gums around it can. Food collects under the pontic, so cleaning beneath it every day matters. Floss threaders or a water flosser make that easier. The practice recommends cleanings and exams every six months to keep a bridge and the surrounding teeth healthy. With a traditional bridge, decay on an anchor tooth is the most common reason a bridge has to be replaced, so keeping those teeth clean protects the whole restoration.

Frequently Asked Questions

Is an implant-supported bridge stronger than a traditional bridge?

It is anchored in bone rather than on natural teeth, which the practice describes as offering added stability and longevity. Your doctor will explain whether that advantage matters for your gap.

Does getting either bridge hurt?

Bridge work is done under local anesthesia. Implant placement is a surgical step, with sedation available, and most people report some soreness for a few days afterward.

Can a traditional bridge be replaced with an implant bridge later?

Often, yes, as long as there is enough bone or the area can be grafted. Your doctor can assess this when the existing bridge needs replacing.

Is a bridge better than a partial denture?

The practice notes that a bridge is fixed in place, while a partial denture is removable. Many patients prefer a bridge for its stability and natural feel.

Find Out Which Bridge Fits Your Gap

The right choice depends on the health of your neighboring teeth, your bone and how many teeth you are replacing. Request an appointment or call (225) 761-8585 to have the doctors at Kidder Owens Dental look at your imaging and walk you through both options.